Setting Up The Interactivity Profile; Setting Up An External Modem - Philips 32DW6658/01 Handbook

Setting up the interactivity profile

This menu allows you to set up the interactivity
profile for MHP applications.
Applications
Options
Enable broadcast
applications ?
Automatic start
Yes = broadcast applications will run

Setting up an external modem

Some MHP applications will require you to make
live responses to the program that is currently
being broadcast. For these cases, you can connect
an external modem to the tv (see page 22).
This menu allows you to set up the external
modem connection.
Recommended RS232 modems: Philips only
recommend modems which they have tested,
information on these is available from:
- the internet, address : www.philips.com/support
- the Philips help desk telephone number (see
separate guaranty booklet).
Other types of modem can not be guaranted by Philips.
& From digital mode, press the
display the
Applications
Ï
é Use the
key to select
Ï
" Select
(
installation
display the installation menu :
Setup
Installation
Service lists
Service setup
Test reception
Modem setup
Setup the modem
Remark: Don't for get to switch on the modem !
' Select
Modem setup
¬
( Press
again and confirm with
activate the modem adjustments.
If no modem is connected, leave this setting on
The modem adjustments are then unavailable.
6
No
Yes
Yes No
Exit
Close
‹
key to
MENU
menu.
u
and press .
setup
¬
) and press to
11:46
Is an external modem connected ?
Telephone number
User name
Password
Dial type
Modem initialisation string
Dial-out prefix
Close
Ï ¬
( ) and press .
u
to
No
& From digital mode, press the
display the
Applications
é Then, press the white
menu.
Options
Ïî
" Use the
keys to select a setting, make
your adjustment with the
u È
press or
•
Enable broadcast applications
permanently disable downloaded MHP
applications, select
•
Automatic start
to start automatically, select
Ïî
§ Use the
keys to select a setting and
¬
press to enter into the sub-menu. Make
your adjustment and press
The first settings are relevant if you already have an
ISP (Internet Service Provider). If not, the MHP
applications can use an ISP provided by the
broadcaster.
•
Telephone number
the number provided by your ISP.
• : enter your ISP user name.
User name
@ #
Use the P
• : enter your ISP password.
Password
• : indicate your telephone system,
Dial type
or .
tone pulse
•
Modem initialisation string
compatible initialization string as mentioned in
the manual of your modem. Use the
keys to input the right codes.
• : if you are connected to a
Dial-out prefix
switchboard, you have to indicate the dial-
out prefix.
•
Code to disable call-waiting
disable call-waiting, use the string indicated in
the modem's manual.
•
Wait for a dial tone ?
modem type, you need to select
•
Idle time (minutes) before disconnect
prevent high telephone bills, you can adjust
the maximum idle time. It is advise to start
with 3 minutes.
Warning: your own ISP data are default values. If
the broadcaster provides a different ISP, Philips can
not guarantee what telephone cost will be charged.
è Press the blue key to leave the menu.
.
‹
key to
MENU
menu.
key to display the
OPTIONS
Ȭ
keys and
to exit.
: If you wish to
No.
: If you want MHP applications
Yes.
u È
or to exit.
: enter with the digit keys
keys to select the characters.
: indicate a Hayes
@
P
: if you want to
: depending on the
or
Yes No
: to
#
.