Digital Surround Receiver; Record With Your Recorder; Select Connected Equipment - Philips 47PF9441D/37B User Manual

2572.3 en 13-11-2006
o o
DISPLAY SYNCHRONIZED
L
DIGITAL AUDIO OUT
DIGITAL
AUDIO
OUT
POWER
PHILIPS DEVICE CONTROL
MY CONTENT
Note: to record digital programs to an analog recorder, the TV needs to be switched on and tuned
to that digital programs.
MUTE
SELECT SELECT
INPUT INPUT
INFO
13:18 Pagina 55
Connect a Digital Surround receiver
<
Connect a MultiChannel Surround receiver to the
AUDIO OUT
Note: Due to legal requirements, it is possible that with
AUDIO o
DISPLAY certain copy protected PCM audio qualities from a
R
SYNCHRONIZED
OUT
peripheral equipment connected to the
Digital audio output signal is muted.

Record with your recorder

FORMAT
GUIDE
Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
FAV
See the handbook for your recorder.
Note:When recording analog programs, switching channel
numbers on your TV does not disturb recording !

Select connected equipment

Before operating your connected equipment you have to make
a selection in the Installation, Connections menu, p. 36.
-
1. Press the
2. Press the cursor up/down to select
HDMI 1
connected your devices.
SELECT SELECT
3. Press
PIP A/CH
INPUT INPUT
connector at the bottom of the TV.
AV button.
, , Side or TV, according to where you
HDMI 2
.
OK
DIGITAL
input, the
HDMI
, , ,
AV1 AV2 AV3
55