Table of Contents
Advertisement
Available menu items dependant of the
selected and available Surround modes.
Surround settings
Test start
Test stop
Centre volume
•
Balance
Rear volume
3D effect
•
Surround mode
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume
3D effect
Surround mode
Use of the menus
20
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
With extra loudspeakers connected
The contents of the Surround settings menu depends on the extra
speakers/amplifiers connected and on the configuration settings selected in
the Setup menu. See Connect Peripheral Equipment, Extra loudspeakers, p. 34
and Install TV Setup, p. 13.
If no extra front or rear speakers are connected do not change the predefined
factory settings of Extra Front and Rear speakers.
Note: you can select only those surround modes which can be used with the
broadcast signal.
The graphical representation of the speakers is displayed on screen when
controls are being changed or when in test tone mode.
The drawing on screen is updated according to the chosen setup and the
selected surround mode. Speakers which are active are highlighted.
In 3D surround mode the graphical representation of the rear loudspeakers is
replaced by the symbol ®r.The menu item 3D effect appears and the level
of the 3D effect can be adjusted.
With two extra rear surround loudspeakers connected
The menu item Test which only appears in Dolby 3 Stereo, 3D Surround
mode or Pro Logic, enables you to have a reference of the internal and the
rear loudspeakers loudness.
Select
,
Dolby 3 Stereo
3D Surround
Select
and press the
Test start
A steady noise tone is switched sequentially through each of the available
loudspeakers, for 2 seconds.This gives you a reference of the volume level
from each loudspeaker.
The loudspeakers activated light up in the screen graphic.
Select
,
Centre volume
Balance
adjustments.
Select
and press the
Test stop
adjustments of the speaker levels.
or
.
Pro Logic
key.
SELECT/OK
or
and alter the selected
Rear volume
key when you have finished the
SELECT/OK
Advertisement
Table of Contents
