Connecting peripheral equipment
Video recorder
Other equipment
Amplifier
Side connections
4
5
6
7
8
9
0
Á
Ø
* only available for the versions with EXT2.
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Satellite receiver, decoder, games, etc.
Make the connections as shown opposite.
To connect a Hi-fi unit, use an audio connecting cable and
connect :
-The "L" and"R" outputs of theTV set to an "AUDIO IN" "L"
and "R" of the Hi-fi unit.
-The "PCM" output of theTV set to a "DIG IN" input of the
amplifier (amplifier with digital coaxial input).
Make the connections as shown opposite.
Headphones
When headphones are connected, the sound on theTV set
will be cut.The
level.
The headphone impedance must be between 32 and 600 Ohms.
To select connected equipment
n
key to select EXT1,EXT2*(and AV) for the side connections.
Press the
Most equipment (decoder, video recorder) carries out the switching itself.
@ " #
keys are used to adjust the volume
0
.
13