Advertisement
PGA Drum Bundle
PG Alta
Drum Microphone Kit
Phantom Power
All condenser microphones require phantom power to operate. This micro-
phone performs best with a 48 V DC supply (IEC-61938), but it can operate
with lower voltages.
Phantom power is provided by the mixer or audio interface that the micro-
phone is connected to, and requires the use of a balanced microphone cable:
Optional Accessories and Replacement Parts
Microphone Clip for SM58, SM57, SM87A, BETA87A,
BETA87C, PGA57, PGA58, PGA48, PGA81
Black Foam Windscreen for PGA81, SM94 and SM137
7.6 m (25 ft.) Cable (XLR-XLR)
5/8" to 3/8" Thread Adapter
Vinyl zippered storage bag
Drum Microphone Mount
PGA52 Replacement Grille
PGA57 Replacement Grille
PGA56 Replacement Grille
Specifications
PGA52
Type
Dynamic (moving coil)
Frequency Response
50 to 12, 000 Hz
Polar Pattern
Cardioid
Output Impedance
150 Ω
Sensitivity
at 1 kHz, open circuit voltage
-55 dBV/Pa¹ (1.75 mV)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
454 g (16.01oz.)
Connector
Three-pin professional audio (XLR), male
Environmental Conditions
Operating Temperature
Relative Humidity
2017/10/24
XLR-to-XLR or XLR-to-TRS. In most cases, there is a switch or button to
activate the phantom power. See the user guide for the mixer or interface for
additional information.
NOTE: Applies to PGA81 condenser microphones only. Supplying phantom
power to the other included microphones will not cause damage.
A25D
A3WS
C25J
31A1856
95B2324
AP56DM
RPMP52G
RPMP57G
RPMP56G
-20° to 165°F (-29° to 74°C)
0 to 95%
Shure Incorporated
5/11
Advertisement
