Table of Contents
Advertisement
2572.3 en
22-03-2007
13:16
Pagina 5
Getting started (Continued)
Note:Watching Cable TV programs that don't require
the cable box
Since you've connected the cable TV signal directly to the TV's
tuner, you can also watch the unscrambled programs by simply
tuning to the desired channel.You must first use Autoprogram,
however, to store channels in the TV's memory. See page 34.
This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
Connect the mains
<
Insert the power cord supplied into the mains at the
bottom of the TV and in the wall socket.
Warning: verify that the power supply voltage corresponds
to the voltage printed on the sticker at the back of the TV.
Contact your local dealer if your power supply is different.
Remote control
<
Insert the 2 batteries supplied (Type R6-1,5V).
Be sure the (+) and (-) ends of the batteries line up
correctly (inside of case is marked.)
For most buttons pressing a button once will activate the
function. Pressing a second time will de-activate it.
5
Advertisement
Table of Contents
