Sound Menu - Philips 34PT9420/69R User Manual

315 2163.1 (16X24) 22-10-2002 13:15 Pagina 14

Sound menu

Sound
TV
Volume
Equalizer
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(3D effect)
AVL
Delta volume
Smart sound
Surround Modes
Dependent on the sound signal broadcasted,
select one of the Surround modes.
Stereo
Dolby 3 Stereo
(optimal with Dolby Surround broadcasting)
3D Surround
(optimal with Dolby Surround broadcasting)
representation of the rear loudspeakers is
replaced by the symbol ®r.
Select the level of 3D effect with the cursor
left/right.
Use of the menus
14
Press the cursor right to select
Select the menu items in the Sound menu with the
cursor up/down and adjust the settings with the cursor
left/right.
Remember, control settings are at normal mid-range
levels when the bar scale is centred.
Note:
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo
transmission.
- Nicam/Analogue is only selectable in case of Nicam
transmission.
- Surround modes can not be modified when a headphone
has been connected.
This mode reproduces only
the left and right front
sound signals.
You only hear a stereo
sound if the broadcast
which you are receiving is
transmitted in stereo or
nicam stereo.
The sound signal is now
distributed over the front
left, the front right and
the centre TV
loudspeakers.
The rear loudspeakers do
not produce any signal.
3D Surround enables you
to experience the effect of
Dolby Surround Pro Logic*
without the need of having
rear speakers connected or
activated.The graphical
Sound
Hall
The special sound signal is
distributed over the rear
loudspeakers which
creates a hall effect from
the rear.
The centre loudspeaker
does not reproduce any
signal.
This mode is recommended when you wish to
add surround sound to a broadcast which is not
encoded Dolby Surround or to a mono signal.
Pro Logic
(with Dolby Surround broadcasting)
In addition to the left and
right internal speakers, the
centre and the rear
surround loudspeakers
reproduce the Dolby
Surround Pro Logic
sounds.
This sound is always present in the movie or
programme marked with G Dolby
Surround.This mode is especially recommended
for such programmes or movies.Dolby Pro Logic
signals are also present on some DVD tracks.
Note: Normal stereo broadcast is not always
encoded to produce a rear surround sound.
Pro Logic and Hall can only be reproduced if
Surround speakers is set to Yes in the Setup, Speaker
menu, p. 11, and rear speakers are connected.
.