Advertisement
A
/C
NTENNA
Y
our Cable TV input into your home may be a single (75 ohm)
cable or use a cable box decoder. In either case the connec-
tion is very simple. Follow the steps below to connect your cable
signal to your new television.
Direct Antenna or Cable Connections:
If your signal comes from an outside antenna or a single
round 75Ω cable from your cable company:
1
If using an antenna, connect the cable from the antenna to
the Input on a Signal Splitter (not supplied).
If using a single round 75Ω cable supplied from your
Cable Company, connect the end of the cable to the Input on
an optional Signal Splitter (not supplied) and screw it down
finger tight.
2
Using two other round 75Ω cables (not supplied) connect
one end of the first cable to one of the outputs on the optional
Signal Splitter. Connect one end of the second round 75Ω
cable to the second output on the optional Signal Splitter.
3
Connect the open end of the first cable to the ANT A 75Ω
Input located on the back of the TV. Connect the open end of
the second cable to the ANT B 75Ω Input located on the back
of the TV.
Cable Box Connections:
If your signal comes from a cable company and you use a sup-
plied Cable Box with signal Input/Output Jacks:
(This connection will NOT supply Stereo sound to the TV. The
sound from the cable box will be mono.)
1
Connect the open end of the round Cable Company sup-
plied cable to Input Jack on an optional Signal Splitter (not
supplied).
2
Using two other round 75Ω cables (not supplied) connect
one end of the first cable to one of the outputs on the optional
Signal Splitter. Connect one end of the second round 75Ω
cable to the second output on the optional Signal Splitter.
3
Connect the open end of the first cable to the (Cable)
Input located on the back of the Cable Box. Connect one
end of the second round 75Ω cable to the ANT B 75Ω Input
on the back of the TV.
4
Connect another round 75Ω cable to the Output Jack (To
TV) located on the back of the Cable Box. Connect the
other end of the cable to the ANT A 75Ω Input on the back of
the TV.
NOTE: Be sure to set the OUTPUT CHANNEL SWITCH on the
back of the cable box to CH 3 or 4, then tune the cable box on the
TV to the corresponding channel. Once tuned, change channels at
the cable box, not the television.
Cable Box (w/Audio/Video Outputs):
This connection will supply Stereo sound to the TV.
1
Connect the open end of the round Cable Company sup-
plied cable to Input Jack on an optional Signal Splitter (not
supplied).
2
Using two other round 75Ω cables (not supplied) connect one
end of the first cable to one of the outputs on the optional
Signal Splitter. Connect one end of the second round 75Ω
cable to the second output on the optional Signal Splitter.
3
Connect the open end from one of the round 75Ω cables
coming from the Splitter to the (Cable) Input on the Cable Box.
4
Connect the open end of the second round 75Ω cable to the
ANT A 75Ω Input on the back of the TV.
5
Using a RCA type Video Cable, connect one end of the cable
to the Video (or ANT, your cable box may be labeled different-
ly) Out jack on the cable box and the other end to the AV1
Video Input on the TV.
6
Using a RCA type Audio Left and Right Cable, connect one
end to the left and right Audio Out L & R jacks on the cable
box. Connect the other end to the AV1 Audio L & R Input jacks
on the TV.
NOTE: Use the AV button on the TV remote control to tune to the
AV1 channel for the cable box signal. Once tuned, change channels at
the cable box, not the television. Pressing the AV button repeatedly will
scroll all the AV Input channels, including the presently tuned channel.
H
OOKING
TV
Direct Cable Connection:
ABLE
Cable Box with RF Inputs and Outputs Connection:
Cable Signal
IN from the
Company
Cable Box with Audio/Video Outputs Connection:
U
T
P THE
ELEVISION
Outdoor or Indoor Antenna
(Combination VHF/UHF)
The combination antenna receives normal
broadcast channels 2-13 (VHF) and 14-69 (UHF).
300 to 75-ohm
Adapter
Twin
Lead Wire
Round 75Ω
Coaxial Cable
Cable signal coming from
Cable Company (Round 75Ω
coaxial cable)
Cable
Signal
Splitter
Round 75Ω
Coaxial Cable
Cable Signal IN from the
Signal
Splitter
Video Cable (Yellow)
Round 75Ω
Coaxial Cable
2
Signal
Splitter
Additional Round
75Ω
Coaxial Cables
Output Channel Switch
Round 75Ω
Coaxial Cable
Cable Company
Output Channel Switch
Jack Panel Back
of Cable Box with A/V Outputs
Audio Cables
L & R (Red, White)
b
P
b
P
Jack Panel Back of TV
Back of TV
b
P
b
P
Note: The Signal Splitter and
the Round 75Ω coaxial cables
are not supplied with the TV.
Jack Panel Back
of Cable Box
b
P
b
P
Jack Panel Back of TV
b
P
b
P
Advertisement
