Remote Use With Accessory Devices (Code Entry) - Philips 27PT643R/17 Directions For Use Manual

R C
EMOTE ONTROL
N
ow that you have looked up the four-digit
Remote Code Number for your brand of
device, you are ready to follow the four sim-
ple steps below.
Please read through steps 1-4 before begin-
ning.
1
Place the TV/VCR/ACC Mode
Switch in the proper position.
2 Press the VCR • RECORD button on
the remote control and release.
3
Press the AUTO SOUND button on
the remote within 30 seconds, then
release.
4
Enter the FOUR-DIGIT REMOTE
CODE NUMBER (page 29-31) for
your desired device. The remote is now
ready to send commands to the unit.
5
Point the remote at the Device. Press
the POWER button on the remote to
turn the unit ON.
H H
ELPFUL
Remember, if this doesn't work the first time,
repeat the steps using a different remote code
number.
After a second try and the remote does not
operate your device, see if there is another
four-digit code number (pages 29-31) listed
for your device and repeat the steps above
using the new number.
If after repeated attempts the code number
method does not work you device, try the
SEARCH METHOD on the next page.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
U
SE WITH
Satellite Receiver
or DBS, DVD
Cable Converter
INT
A D
CCESSORY EVICES
1
VCR
2
5
28
- C E
ODE NTRY
3
VOL
M
ETHOD
4