Installation; Installing Your Television Set; The Keys On The Tv Set - Philips 29PT8609/12 User Manual

Philips tv 29pt8609 74 cm (29") real flat 100hz digital scan with digital crystal clear
Hide thumbs Also See for 29PT8609/12:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Installing your television set

&
Positioning the television set
5 cm
5 cm
Place your TV on a solid, stable surface, leaving
a space of at least 5 cm around the appliance.
To avoid accidents, do not put anything on the
set such as a cloth or cover, a container full of
liquid (vase) or a heat source (lamp).
The set must not be exposed to water.
é
Connections
• Insert the aerial plug into the : socket at
the rear of the set.
If you are using an indoor aerial, reception may be
difficult in certain conditions.You can improve
reception by rotating the aerial. If the reception
remains poor, you will need to use an external aerial.
• Insert the mains plug into a wall socket
(220-240 V / 50 Hz).

The keys on the TV set

The television set has 4 or 5 keys which are
located on the front or the top of the set
depending on the model.
"
The VOLUME - + (-
2
5 cm
+) keys are used to
"
Remote control
Insert the two R6-type batteries (supplied)
making sure that they are the right way round.
Check that the mode selector is set to TV.
The batteries supplied with this appliance do
not contain mercury or nickel cadmium.
If you have access to a recycling facility, please
do not discard your used batteries (if in
doubt, consult your dealer).When the
batteries are replaced, use the same type.
'
Switching on
To switch on the set, press the on/off key.
A red indicator comes on and the screen
lights up. Go straight to the chapter Quick
installation on page 4.
If the television remains in standby mode,
#
press
on the remote control.
P
The indicator will flash when you use the
remote control.
adjust sound levels.The PROGRAM - + (-
keys are used to select the required programmes.
To access the menus, simultaneously hold down
"
"
the
- and
+ keys (or MENU key).
The PROGRAM - + keys may then be used to
select an adjustment and the -
make that adjustment.
To exit from the menus, hold down the 2
"
and
+ keys (or MENU key).
Note : when the
Child Lock
these keys are unavailable (refer to
menu on page 7).
+)
P
"
+ keys to
"
-
function is activated,
Features

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents