Page 1
The remote manifold consists of part no. 248397. All other parts referred to in the following proce- dure are parts you remove from the standard manifold and reuse, or parts the installer must supply. TI4951a Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 Copyright 2004, Graco Inc. is registered to I.S. EN ISO 9001...
Installation Installation 1. Flush system (see proportioner operation manual). WARNING 2. Relieve pressure (see proportioner operation man- ual). Use only high pressure fluid hoses rated to withstand 3. Remove screws (B, C) and take the integrator the maximum working pressure of the proportioner. assembly (A) off the proportioner mix manifold (M).
Page 3
Balancing Back Pressure Balancing Back Pressure Flow rates and/or viscosity differences between compo- Reduce pressure loss by using: nent materials can create different pressure drops from • Large diameter pipe or tubing the proportioner to the manifold, causing unequal back •...
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.