Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (AV1 in and AV2 out).
The AV1 in socket has audio and video inputs.
The AV2 out socket has audio and video outputs.
Video recorder
Side connections
10
Operating manual-21PT2324/67
p10_21PT2324_67
& Connect the TV's yellow and white (AV1 in)
jacks to the corresponding Video and Audio
jacks on the player.
é Connect the TV's white AUDIO IN jacks to
the corresponding AUDIO OUT jacks on the
player. Match the cable colour to the jacks'
colour. The white jack is the Left (Mono)
audio channel.
" Turn on the TV and VCR player. Set the TV to
AV1. You can now play your video cassette
tape.
Connection is also possible via the aerial cable.
You will therefore need to tune in your video
recorder's test signal and assign a channel
number 0. Select channel 0 to playback.
Audio-Video connections
& Connect the TV's yellow and white jacks to
the corresponding Video and Audio jacks on
the equipment.
é Connect the TV's white AUDIO IN jacks to
the corresponding AUDIO OUT jacks on the
player. Match the cable colour to the jacks'
colour. The white jack is the Left (Mono)
audio channel.
" Turn on the player. Set the TV to FRONT. You
can now play your equipment.
Headphone connections
When headphones are connected, the sound
on the TV set will be cut. The CH + or – keys
are used to adjust the volume level.
The headphone impedance must be between
32 and600 Ohms.
10
Peripherals
04/12/04, 6:34 PM