Table of Contents
Advertisement
Remote control keys
1 Surround Sound
To activate / deactivate the surround sound
effect. In stereo, this gives the impression that the
speakers are further apart. For models equipped
with Virtual Dolby Surround*, you can experience
Dolby Surround Pro Logic sound effects.
* Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbols are trademarks of
Dolby Laboratories.
2 VCR key *
3 Screen information / permanent no.
To display / clear the program number, name (if it
exists) and audio mode. Press the key for 5
seconds to activate permanent display of the
number.
4 Menu
To call up or exit the menus.
5 Cursor
These 4 keys are used to navigate through the
menus.
6 Volume
To adjust the sound level
7 Mute
To mute or restore the sound
8 Teletext keys (p.8)
or VCR keys *
9 Selection of EXT
socket (p.9)
! Standby
Lets you place the TV set on standby.To turn on
the TV, press
P
* VCR key
The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access
the VCR functions:
The remote control is compatible with all VCRs using the RC5 standard.
Safety Information
• Plug the TV into a 220V – 240V AC, 50 Hz supply.
• Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– a bright white line is displayed across the screen.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
• Cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth.
• No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vicinity.
• Do not place your TV set under direct sunlight or heat.
• Do not cover or block the TV as it could lead to overheating.
• Leave at least 5 cm around each side of TV set to allow for proper ventilation.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water.
• Battery Usage CAUTION – To prevent battery leakage that may result in bodily injury, property damage, or damage
to the unit:
– Install all batteries correctly, with + and – aligned as marked on the unit.
– Do not mix batteries (old and new or carbon and alkaline, etc.).
– Remove batteries when the unit is not used for a long time.
Useful Tips
• Do not leave your set on standby mode for a prolonged
period of time. Switch off set to allow it to be demagnetised. A demagnetised set supports good picture quality.
• Do not shift or move the set around when it is switched on. Uneveness in colour in some parts of the screen may
occur.
• Never attempt to repair a defective TV yourself. Always consult a skilled service personnel.
,
,
to
(or
).
Å
Teletext keys (p. 8)
VCR keys (p.11) and list of radio stations
# Radio / TV mode
To switch the TV set to radio or TV mode (for
versions equipped with radio).
$ 16:9 Format (p. 7).
% Sleeptimer (depending on version)
To select the length of time before the set automatically
switches to standby (from 0 to 240 minutes)
& Smart picture and sound
Used to access a series of predefined picture and sound
settings.
The
position relates to settings selected from the
personal
menus.
( Teletext (p.8)
) Program selection
To access the next or previous programme.The
number, (name) and sound mode are displayed for a
few moments.
For some programs, the title of the program will be
displayed at the bottom of the screen.
~ Digit keys
Direct access to the programmes. For a 2 digit
programme, enter the 2nd digit before the dash
disappears.
+ Sound mode
Used to force programmes in
to
Stereo
Mono
choose between
The
indication is red when in forced position.
Mono
P
and
Stereo
or, for bilingual programmes, to
or
.
Dual I
Dual II
(p. 5)
Nicam
3
Hide quick links:
Advertisement
Table of Contents
