Philips 14PT3426/V7 User Manual page 13

PICTURE SOUND TUNING TIMER
CLOCK - -:- - AM
ON CH - - -
ON TIMER - - : - - AM
OFF TIMER - - : - - AM
DISPLAY OFF
ALARM OFF
PICTURE SOUND TUNING TIMER
BLUE BACK ON
CH NO. 1
SWAP TO - - -
SWAP NOW
LANGUAGE ENGLISH
BASIC OPERATION
INSTALL
4) TIMER MENU
Press menu key to display main menu. Then select the
timer submenu by VOL+VOL- or
CH+/CH- or
User can select any parameter in timer menu by pressing
CH+/CH- or
VOL+/VOL- or
CLOCK : You can set time by using 0 to 9 digit keys & can
change AM/PM using VOL+/VOL- or
Clock is stored in standby condition but gets reset after
power off - on.
ON CH : Used to switch on set using ON TIMER to the
required program number.
ON TIMER & OFF TIMER
You can set ON/OFF timer by using 0 to 9 keys. Your TV
set will switch ON/OFF automatically at the time you
select.
DISPLAY : Clock display will appear continuously on the
screen by making display ON & it will disappear by
making Display off.
ALARM : In Alarm ON condition, during off timer GOOD
BYE message is displayed before set goes to standby.
NOTE- All other options in Timer menu remains
deactivated until we enter clock time.
5) INSTALL MENU :
INSTALL
Press menu key to display main menu. Then select the
Install submenu by VOL+VOL- or
CH+/CH- or
User can select any parameter in Install menu by
pressing CH+/CH- or
setting by VOL+/VOL- or
BLUE BACK : When blueback is ON, sets the screen in
pleasant blue colour, if no signal is being received in
TV/AV mode. Blueback gets disabled as soon as the
transmission resumes. It also activated automatically
with poor reception of signal. For watching TV in case of
weak signal reception, you can OFF the blueback. Set
gets OFF automatically if blueback is present more than
approximately 10 minutes.
CHANNEL NO : It displays the current channel being
viewed.
SWAP TO : In SWAP TO set program number which is
to be swapped
keys from remote handset.
SWAP NOW: Select SWAP NOW to swap the
two programs.
LANGUAGE : You can select ENGLISH, HINDI,
MARATHI and GUJRATI language, which will be used
for displaying menus and indications in selected
language.
11
/ key and press
/ key to enter into it.
/ key and adjust it to desired setting by
/ key.
/ key.
/ key and press
/ key to enter into it.
/ key and adjust it to desired
/ key.
with current program by using direct 0 to 9