Related Manuals for Fellowes ESI Lotus VE Series
Summary of Contents for Fellowes ESI Lotus VE Series
- Page 1 Lotus VE ™ assembly and operation instructions sit-stand workstation MODEL #’s: LOTUS-VE1-BLK LOTUS-VE2-BLK...
-
Page 3: Safety Instructions/Warning
Lotus VE safety warnings ≤ 20 lbs ≤ 9.07 kg ≤ 5 lbs ≤ 2.27 kg safety instructions/warning Read and follow all instructions and warning before use. • WARNING: PINCH POINT! KEEP HANDS CLEAR OF SUPPORT BARS DURING OPERATION. SERIOUS INJURY MAY OCCUR. •... -
Page 4: Product Assembly
Lotus VE product assembly step 1 Attach the Tower Pole to the Base Plate • Choose one of three locations to attach the Tower Pole to the Base Plate depending on your desk depth. Furthest set to the rear for 23.6” (600mm), middle set for 27.5”... - Page 5 Lotus VE product assembly step 4 Attach the Platform • Slide the platform onto the tower pole and secure it with four M6x12mm bolts and the M4x55mm Allen Key. step 5 Attach VESA Assembly to Tower Pole • Option 1: Single Monitor Version Unscrew the VESA Knobs from the VESA Assembly.
- Page 6 Lotus VE product assembly step 7 Attach the Lever to the Platform • Attach the Handle on the left or right side, using two M6x12mm bolts and M4x55mm Allen Key. • Remove the cable tie from the handle. step 8 Setup Cable Management •...
- Page 8 To make a warranty claim, contact ESI at 800-833-3746 or customerservice@esiergo.com. You must provide proof of purchase, such as the original purchase order number. © 2018 Fellowes, Inc. Part # 872346 Lotus VE Rev A 04/2018...