Table of Contents
Advertisement
Connecting a camera, camcorder or
game console
1.
As shown in the figure below, connect
your camera, camcorder or game con-
sole in at the side of the TV.
2.
Press the
key on the remote con-
trol. The source list is displayed.
Press the ï key to select EXT3 and
3.
press the Æ /
selection.
•
For mono equipment, connect to
VIDEO (2) and AUDIO L (3)
•
For stereo equipment, connect both
AUDIO L and AUDIO R (3)
•
To obtain S-VHS quality with an S-VHS
camcorder connect the S-VHS
cables with the S-VIDEO input (1) and
AUDIO L / R inputs (3)
Warning: Do not connect cables (1) and
(2) at the same time. Connecting both cables
(1) and (2) can cause picture distortion.
Side of TV
1
EN-30
key to confirm your
3
2
Connect headphones
1.
As shown in the figure below, insert the
headphones plug into the headphone
socket
at the side of the TV.
Press the
2.
key on the remote con-
trol. The source list is displayed.
Press the ï key to select EXT3 and
3.
press the Æ /
selection.
The headphone socket has a 3.5 mm jack.
The headphone impedance must be between
8 and 4000 Ohm.
TIP: Press the
control to switch off the sound from loud-
speakers of the TV. To switch on the sound,
press the
key again.
key to confirm your
key on the remote
Hide quick links:
Advertisement
Table of Contents
