Philips 52PFL5605H/05 User Manual page 22


[Colour]: Selects a predefined colour.

[Custom colour]: Set your own
Ambilight colour. To access this option,
set [Ambilight] > [Colour] >
[Custom].

[Separation]: Adjusts the difference in
colour levels between each side of the
TV. Turn off this feature for a dynamic
and uniform Ambilight colour.

[TV switch off]: Selects how Ambilight
switches off when the TV is switched
off.

[Lounge light mood]: Selects a lounge
light mode. This setting is applied when
lounge light is enabled in standby mode.

[Scenea lounge light]: Switch on or off
Scenea lounge light when Scenea is
enabled.

[Wall colour]: Selects a colour to
match the wall colour. Ambilight will
correct its colours to mix best with the
colour of the wall behind the TV.
Set Ambilight response
(Available on certain models only.)
Before you can adjust the speed of Ambilight
> [Setup] > [TV
response, press
settings] > [Ambilight] > [Colour] >
[Dynamic].
Set the speed at which Ambilight responds
to on-screen images.
1. Press (Experience).
2. Select [Ambilight dynamic], then press
OK.
3. Move the slider to set Ambilight
responsiveness.
4. Press to exit the slider.
5. Press OK to confirm your choice.
Use lounge light
(Available on certain models only.)
When the TV is on standby, you can switch
on Ambilight and create a lounge light effect
in your room.
During TV standby, press
the TV.
Note: It may take more than 5 seconds for
the lounge light to switch on.
EN 22
on the side of
To select another lounge light colour, see
Use your TV > Use Ambilight > Set up
Ambilight.