Watch Tv - Philips 46HFL5573D/10 User Manual

EasyLink controls
Note: EasyLink controls are available
when the connected device is HDMI-CEC
compliant.
EasyLink allows you to control your TV
and other HDMI-CEC devices with one
remote control.
Access EasyLink controls
1. While you view content from a
connected
HDMI-CEC device, press OPTIONS.
2. Select [Show device keys], then
press OK.
3. Select the EasyLink control button,
then press OK.
Read more on EasyLink in Use more of
your TV > Use EasyLink (Page 18).
MediaSuite xxHFL5573D/10

Watch TV

Switch TV on or off
Switch the TV on

Press the power switch at the
base of the TV to the ON
position.

If the TV is in standby, press
on the remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from
standby, press CH +/- on the front of the
TV.
Switch TV to standby
Press on the remote control. The
remote control sensor on the TV
switches to red.
Automatic switch off
This TV is designed with energy efficiency
settings. If there is no user interaction
(such as pressing a remote control button
or a control on the front panel) for four
hours, the TV will automatically switch to
standby.
Page 14