Installing Four Sli Tm -Ready Graphics Cards - ASROCK TRX40 CREATOR User Manual

TRX40 Creator
TM
2.8.3 Installing Four SLI -Ready Graphics Cards
Step 1
Insert one graphics card into the PCIE1
slot, another graphics card into the PCIE2
slot, the third graphics card into the PCIE3
slot and the last graphics card into the
PCIE4 slot. Make sure that the cards are
properly seated on the slots.
Step 2
Connect the auxiliary power source to the
PCI Express graphics card. Please make
sure that both power connectors on the
PCI Express graphics card are connected.
Repeat this step on the three graphics
cards.
Step 3
Align and insert the bridge card to the
goldfingers on each graphics card. Make
sure the bridge card is firmly in place.
41