Automatic Tuning Of Analogue Programmes; Manual Tuning Of Analogue Programmes; Other Settings In The Install Menu - Philips 32PF7520D/10 User Manual

Automatic tuning of analogue programmes

This menu allows you to automatically search for all
the analogue programmes available in your region.
& From the analogue mode, press the
(TV menu) key to display the main menu.
é With Cursor (œ É ) keys to select Install and
then Auto Store. Press É and the search begins.
After several minutes, the Install menu reappears
automatically.
TV Menu
Auto Store
Picture
Sound
Features
Program
Install

Manual tuning of analogue programmes

This menu is used to store the programmes one
at a time.
& Press the
(TV menu) key.
é With Cursor (œ É ) keys to select Install and
then Manual Store.
TV Menu
Manual Store
Picture
Sound
Features
Install
Program No.
" System : select Europe (automatic detection*)
or Western Europe (BG standard), Eastern
Europe (DK standard), United Kingdom
(I standard) or France (LL' standard),
* Except for France (LL' standard) : in this case,
select the option FRANCE.

Other settings in the install menu

& Press the
(TV menu) key and select Install
menu.
é Language : to change the display language for
the menus.
" Country : to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select "... "
12
iDTV 19141 Eng
8
É
TV 196 MHz
É
System Europe
Search
Fine Tune
Store
12
" If the transmitter or the cable network broadcasts
the automatic sort signal, the programmes will be
correctly numbered.
' If this is not the case, the programme will be
numbered in descending order strating at 99, 98,
97, etc
Use the Sort menu to renumber them.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc). Where this
is the case, make your choice using the o œ keys and
confirm with the É key.
To exit or interrupt the search, press the
If no picture is found, refer to the chapter entitled Tips
on p.20
( To exit from the menu, press
' Search : press É key. The search starts. Once a
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered directly
using the keys.
If no programme is found, refer to the Tips chapter on
page 20.
( Program No : enter the required number with
the ÑÉ or (0 to 9) keys.
§ Fine Tune : if the reception is not satisfactory,
adjust using the ÑÉ keys.
è Store : press É key. The programme is stored.
! Repeat steps ' to è for each programme to
store.
ç To quit the menu, press
' Name : If required, you can give a name to the
programmes and external connectors. Use the
ÑÉ keys to move around the name display area
(5 characters) and the o œ keys and to select
the characters. When the name has been entered,
use the Ñ key to exit. The name is stored.
( To quit the menu, press
17/4/05, 3:12 PM
key.
key.
key.
key.