2440.2 gb
05-10-2005
Connecting Peripheral Equipment
The television has 3 external sockets situated at the back of the set (
on the side. Press the
peripheral equipment connected to
The
socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
EXT1
The
socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
EXT2
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.
DVI
Video recorder
CABLE
DVI
RECORDER
Other equipment
DVI
AUDIO
10:15
Pagina 11
key on the remote control to display the
AV
,
EXT1
EXT2/SHVS2
EXT 2
EXT 1
AUDIO
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
EXT 1
programme number 0 (refer to manual store, p. 5).
ANTENNA
EXT 1
EXT 2
75
AUDIO
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket
of the video recorder.You will then be able to record
scrambled transmissions.
DECODER
Satellite receiver, DVD, decoder, CDV, games, etc.
Carry out the connections shown opposite.
Connect the equipment (digital decoder, games, video
recorders, certain DVD drives (with RGB)) and other
equipment to
EXT 1
EXT 1
ANTENNA
EXT 2
75
To select connected equipment
Press the
,
EXT1
EXT2
Source list
,
,
or
AV/SVHS3
PC
HD
ANTENNA
75
IN
IN
.
EXT1
key on the remote control to select
AV
and
) and sockets
DVI
and select
or
TV
.
.
0
.
EXT1
11