Atv Manual Tuning, Broadcast System - Toshiba REGZA AV55 Digital Series User Manual

The television can be tuned-in manually using ATV Manual Tuning. For example: if the television cannot be
connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Use S and R to move across the screen and select any of these ATV Manual Tuning options, then P and Q to adjust the settings.
Programme System
Programme: The number to be pressed on the remote control.
System: Specific to certain areas.
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
external source.
Skip:
Signal Class: The channel classification.
Channel: The channel number on which a station is being broadcast.
Searching: Search up and down for a signal.
Manual Fine Tuning: Only used if interference/weak signal is experienced. See page 35.
Station: Station identification. Use the P or Q and S or R buttons to enter up to seven characters.
To allocate a programme position on the television for a decoder and media recorder: turn the decoder on,
insert a pre-recorded film in the media recorder and press PLAY, then manually tune.
Press MENU and using S or R select the SET UP
1
menu, with Q highlight ATV Manual tuning,
press OK to select.
SETUP
Language
Country
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Manual Setting
AV Connection
Use P or Q to highlight the programme position
2
required e.g. we suggest Prog. 0 for a media
recorder.
Manual tuning
Prog. Channel
0 C60
1 C22
2 C28
3 C25
4 C32
5 C68
6 C69
7 C69
ATV manual tuning
Colour Skip
system
means nothing has been stored or the facility to skip the channel is ON. See page 15.
1/2
English
UK
Station
BBC1
BBC2
ITV
CH4
C-68
Signal Channel Searching
Class
Press OK to select. If the programme is skipped,
3
Skip must be removed before storing.
Manual tuning
System: I
Press R to select System and use P or Q to
4
change if required.
Then press R to select Searching.
5
Press P or Q to begin the search. The search
6
symbol will flash.
Manual tuning
Searching: Up
Each signal will show on the television, if it is not
7
your media recorder, press P or Q again to
restart the search.
When your media recorder signal is found, press
8
R to move along to Station. With P, Q, S and
R put in the required characters, e.g. VCR.
14
Manual Fine Station
Tuning
0 A C 60 0
I
0 A C 60 0
I