Tv Front And Side Panel Controls And Connections - Toshiba COLORSTREAM 46XV640U Owner's Manual

TV front and side panel controls and connections

Model 40XV640U is used in this manual for illustration purposes.
Control panel
1 Green LED and TOSHIBA Logo LED
Power LED(Green) = Power indicator
TOSHIBA Logo LED= On or Off (
2 Remote sensor — Point the remote control toward this
remote sensor ( "Remote control effective range" on
page 19).
3 VIDEO-2 IN — The side panel A/V connections are
referred to as "VIDEO 2" and include standard A/V
connections.
4 Service port — For service use only. Used for updating
the television's firmware.
5 POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
10
Chapter 1: Introduction
Left side panel
page 28).
TV front
6 ARROWS
buttons function as up/down/left/right menu navigation
buttons.
7 MENU (ENTER) — Press to access the menu system (
pages 26–27). When a menu is on-screen, the MENU
button on the TV's control panel functions as the ENTER
button.
8 EXIT — Press to instantly close an on-screen menu.
9 CHANNEL
buttons change the channel (programmed channels only;
page 29).
10 VOLUME
11 INPUT — Repeatedly press to change the source you are
viewing (ANT/CABLE, VIDEO 1, VIDEO 2, ColorStream
HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, PC).
TV top
— When a menu is on-screen, these
— When no menu is on-screen, these
— These buttons adjust the volume level.