Connecting A Cable Converter Box; Connecting A Cable Converter Box And A Vcr - Toshiba 50A60A Owner's Manual

Connecting a cable converter box

This connection allows you to view a separate or different picture on
your PIP when you use a converter box to view premium channels.
Keep your TV selected to ANT 2 and tuned to channel 3 or 4
(whichever channel is vacant in your area). Then use the converter box
to change channels.
You will need:
• two coaxial cables
S-VIDEO
VIDEO
L/ MONO
AUDIO
R
VIDEO 1 VIDEO 2
IN

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another channel. To use the TV's features, select ANT-1. To
view premium channels or record with the VCR, select ANT-2, tune
the TV to channel to 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
You will need:
• one cable splitter
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
TV
Stereo VCR
6
TV
AUDIO CENTER ANT( 75 )
CHANNEL IN
ANT-1
ON OFF
OUT
OUT
VAR
R L
AUDIO
ANT-2
Y VIDEO
L/
L
C
B MONO
AUDIO AUDIO
C
R
R R
COLOR
STREAM
INPUT
DVD IN OUT
Cable converter box
From Cable
From Cable
Note:
You cannot view premium channels in the
PIP window.
PIP swap is not available with this connection.
OUT IN
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable instead of a regular video cable for
better picture performance.
Do not connect a regular video cable and an
S-video cable to Video-1 at the same time.