Using The Pc Settings - Toshiba 42XV550A_560A Owner's Manual

Using the PC Settings

• In PC input mode, you cannot select 3D Colour
Management, Base Colour Adjustment, MPEG NR
and DNR in the PICTURE menu and Colour, Tint,
Sharpness, Black/White Level and Cinema Mode in
the Picture Settings menu (- page 19).
• In PC input mode, Manual Settings (- page 24) is not
displayed.
• First, press o to display the video input mode list, and then
and Q in order to select the PC input mode
press or
(- page 24).
• This function may not be available for some signals and
when no signal is received.
• In certain cases, it may be difficult to optimally set the clock
phase and sampling clock values depending on the input
signal type.
Adjusting the picture size/position
1
Press M, and then press
menu.
2
Press or to select PC Settings.
SETUP
Menu Language
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
PC Settings
Quick Setup
3
Press Q to display the PC Settings menu.
PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
4
Press or to select an option you want to adjust. Press
or to adjust the settings as required.
Horizontal position
Adjusting the clock phase of the picture
If the clock phase, which synchronizes the PC signal and LCD
display, is not optimized, the picture will blur.
This function enables you to adjust clock phase and display a
clear picture.
1
From the PC Settings menu, press
Clock Phase.
2
Press or to obtain a clear picture.
Clock phase
Connecting your TV
or to display the SETUP
English
0
0
0
0
Reset
0
or to select
0
Adjusting the sampling clock
If the sampling clock does not match with the dot clock
frequency of the PC, blurred picture detail will occur, screen
width will change, or drift patterns in vertical lines may be
apparent.
This function enables you to adjust and optimize the picture.
1
From the PC Settings menu, press
Sampling Clock.
2
Press or to optimize the picture.
Sampling clock
Resetting the PC Settings
The Reset function adjusts the PC Settings to the factory
settings.
1
From the PC Settings menu, press
Reset.
2
Press Q.
Note:
When a PC is connected using HDMI, none of these functions
will be available.
or to select
0
or to select
37