Aps (Automatic Programming System); Sorting Programme Positions - Analogue - Toshiba 37BV700B Owner's Manual

Before switching on the television put your decoder and media recorder to Standby if they are connected

APS (Automatic Programming System)

When the APS feature is selected all channels and
settings will be lost, the television will return to factory
settings and then re-tune.
• Press MENU and using the Left or Right button
select Program Table tab.
• The Program screen will appear on the screen.
Press the BLUE button to start APS.
• Press the Left or Right button to set the country.
• Press the BLUE button to cancel APS or the RED
or OK button to start.
You must allow the television to complete the
search.
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 15 00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 15
Analogue APS and Programme Sorting
and ensure the aerial is connected to your television.
English - 15 -
• When the search is complete the television will
automatically select programme position 1. This may
not be a clear picture or the signal may be weak, so
the station order can be changed using program
table which will appear on the screen.
• Press BACK to fi nish.

Sorting Programme Positions - Analogue

• Channels may be moved and saved to the position
of your choice.
• Select Programme Table tab from the main analogue
TV menu.
• With the list of channels showing, use navigation
buttons to highlight the channel you want to move
and press GREEN button. The selected channel will
be highlighted with a frame.
• Use navigation buttons move through the list to your
preferred position. As you do so, the other channels
will move to make room.
• When fi nished, press GREEN button to save your
move.
02.12.2010 11:03:08 02.12.2010 11:03:08