Connecting A Cable Converter Box And Vcr - Toshiba 34HF84 Owner's Manual

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another channel. To watch basic cable and use the TV's
features, select ANT-1.
To view premium channels or record with the VCR, select ANT-2,
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
You will need:
• four coaxial cables
• one set of A/V cables
TV
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
Stereo VCR
From Cable
IN
OUT IN
OUT
Cable converter box
L R
AUDIO
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an S-
video cable (in the S-video jacks) instead of a
standard video cable. Do not connect a
standard video cable and an S-video cable to
Video-1 (or Video-2) at the same time, or the
picture performance will be unacceptable.
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
The unauthorized recording, use,
distribution, or revision of television
programs, videot apes, DVDs, and other
materials is prohibited under the
Copyright L aws of the United St ates and
other countrie s, and may subject you to
civil and criminal liability.
9