Auto Tune; General Controls - Changing Programme Position, Time Display; Stereo And Bilingual Transmissions - Stereo/Mono Or Dual Language Broadcasts - Toshiba 27WL56 Series, 32WL56 Series, 37WL56 Series Owner's Manual

Auto tune, general controls, time display,
stereo/bilingual transmissions
Using Auto tuning
To set up the television using Auto tuning, press
1
MENU and use S or R to select the SET UP menu.
Language
Country
Auto tuning
Manual tuning
Programme sorting
AV connection
Back
MENU
Press Q to highlight Language and S or R to
2
select.
Using Q highlight Country, then S or R to select.
3
The television will now tune the stations for your
country.
Press Q to highlight Auto tuning, then press OK.
4
!
Previous settings will be lost !
Press EXIT for no change.
Press OK to start Auto tune.
Back
MENU
Your System will have been selected, if there is a
5
choice, press S or R to select from the systems
displayed, then press OK.
B/G – Continental Europe,
D/K – Eastern Europe, L – France
You must allow the television to complete the search.
When the search is complete the television will
automatically select programme position 1. This may not
be a clear picture, so the station order can be changed
using Programme sorting, see page 9.
SET UP
English
UK
OK
OK
OK
OK
Watch TV
EXIT
Auto tuning
Watch TV
EXIT
– UK
I
Selecting programme positions
To select a programme position use the numbered
buttons on the remote control.
For programme positions below 10 use 0 and the
required number e.g. 01 for programme position 1.
Programme positions can also be selected using P
1/2
and P
To revert to the previous programme position press
To display on-screen information i.e. programme position,
input mode or stereo/mono signal, press CALL.
The time display facility allows the current (text service)
Press
8
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Stereo... Press
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
12
(Q).
e
The Time Display
time to be seen on the television screen.
/ whilst watching a normal television
9
Mono will appear.
I/II to select Stereo or Mono.
O
I/II to select Dual 1, Dual 2 or Mono.
O
( P )
f
.
^ ^