Unlocking Programs Temporarily; Changing Your Pin Code; Using The Pc Setting Feature - Toshiba 26HLC56 Owner's Manual

Unlocking programs temporarily

1
If you try to watch a TV program that exceeds the rating
limits you set, the monitor enters program lock mode. You
can either unlock the program temporarily (see steps 2–3
below) or select an unlocked program to watch.
This program has been blocked!
TV – Y
Exceeds set limits
Push "MUTE" to enter PIN
2
To temporarily unlock the program, press W while the
message is on-screen.
3
Press the Number buttons (0–9) to enter your 4-digit PIN
code, and then press T.
PIN Code
Blocking active
enter PIN code
to temporarily un–block
–
0 9 - Select
If the correct code is entered, the program lock mode is
released and the normal picture appears.
All locking is disabled until the monitor is turned off, and
will be enabled when the monitor is turned on again.

Changing your PIN code

1
Select the Locks menu.
2
Press B or b to highlight New PIN Code.
V-Chip
New PIN Code
0 9 - Select
MENU
Back
3
Press the Number buttons to enter a new four-digit code.
4
Press T. The new PIN code is now active.
Chapter 6: Using the Monitor's features
TV 6
– – –
ENTER Set
Locks
ENTER
* * * *
ENTER Set
EXIT
Watch TV

Using the PC setting feature

You can view the image from a PC on the monitor's screen.
The PC must be connected to the monitor's PC IN terminals.
(- page 15).
You can use the PC Settings feature to adjust the picture's
horizontal position/width, vertical position/height, clock
phase, and sampling clock.
Note: If a PC is not connected, this feature will be grayed out
in the Set Up menu.
To adjust the PC settings:
1
Repeatedly press + to select PC input mode
(- "Selecting the video input source to view"
on page 25).
2
Press Y and open the Set Up menu.
3
Highlight PC Settings and press T.
Language
Video Label
AV Connection
PC Settings
MENU Back EXIT
4
Press B or b to highlight the item you want to adjust.
5
Press C or c to make the appropriate adjustments.
PC Settings
Horizontal Position
Horizontal Width
Vertical Position
Vertical Height
Clock Phase
Sampling Clock
MENU EXIT
Back
Horizontal Position: Moves the picture left/right.
•
The adjustment range is within ±5 from center.*
Horizontal Width: Adjusts the width of the picture.
•
The adjustment range is within ±5 from center.*
Vertical Position: Moves the picture up/down.
•
The adjustment range is within ±5 from center.*
Vertical Height: Adjusts the height of the picture.
•
The adjustment range is within ±5 from center.*
Clock Phase: Helps to reduce noise and sharpen the
•
picture.
The adjustment range is within ±15 from center.*
Sampling Clock: Helps to minimize periodic vertical
•
stripes on the screen.
The adjustment range is within ±15 from center.*
Reset: To reset the PC setting, select Reset and press T.
•
*The range of adjustment may vary slightly.
Set Up
English
ENTER
ENTER
ENTER
Watch TV
1/2
0
0
0
0
0
0
Watch TV
37