Tuner Setting - Toshiba SD-KV550SU Owner's Manual

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR's memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
TV/CABLE selection
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
1 Press VCR MENU. Press SET + or – to select
"CH SETUP", then press ENTER.
2
Press SET + or – to select "TV/CABLE".
3 Press ENTER to select the TV or CABLE
mode.
The arrow indicates the selected mode.
TV - VHF/UHF channels
CABLE - Cable TV channels
4
Press VCR MENU until the menu screen is
cleared.
Note:
You can't select "CH SETUP" if you set the channel to "L1" or
"L2".
2I30201B-En_p26-31
ENU
TI ER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SETUP
SYSTE SETUP
+/Ð/ENTER/ ENU
H SETUP
TV ABLE
AUTO H MEMORY
ADD/DELETE
+/Ð/ENTER/MENU
H SETUP
TV ABLE
AUTO H MEMORY
ADD/DELETE
+/Ð/ENTER/MENU
27
Setting channels automatically
1
Repeat left step 1 and press SET + or – to
select "AUTO CH MEMORY".
2 Press ENTER.
Auto tuning will begin. The channel dis-
play will count up and when finished,
the screen returns to normal.
1/13/06, 2:47 PM
VCR DVD
VCR MENU
ENTER
SET +/–
H SETUP
TV ABLE
AUTO H MEMORY
ADD/DELETE
+/-/ENTER/MENU
〈 〉
0
27