Disc Eject At Emergency - Toshiba SD-W1111 Product Specification

TOSHIBA DVD-RAM SD-W1111

15.3 Disc eject at emergency

Please do according to the following procedures when it is necessary to take out a disc from the drive
in the emergency.
Check that the power supply of the drive is turned off and one minute or more passes.
Insert an attached emergency eject tool in the emergency eject hole and push bumping inside. (Figure
1)
Front bezel opens a little and an inside tray rises. (Figure 2)
When the tray comes out forward, draws out it and the disc is taken out. (Figure 3)
Please draw out the tray with an emergency eject tool, when the tray does not come out. (Figure 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Page 33
OD-A017-02
'99/06/26
Version
Product Specification
1.0