Toshiba SD-V280 Owner's Manual page 43

DVD/VCR
OPEN/CLOSE
PLAY
STOP
PAUSE/STILL
To pause playback (still mode)
Press PAUSE/STILL during playback.
To resume normal playback, press
the PLAY button.
• The sound is muted during still
mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
About the screen saver
If you pause a picture of a DVD video disc and leave it
still for a long while, the screen saver of the DVD/VCR
player automatically appears (when "Screen Saver" is
set to "On" ). To turn off the screen saver, press the
61
PLAY button.
Notes:
• Do not move the DVD/VCR during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the DVD/VCR to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD/VCR to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
STOP button on your remote control once the movie is completed.
• During the DVD playback if you change the operating mode from DVD to VCR, the DVD will continue to play back the disc
and stop after about 5 minutes.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD/VCR, you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
About
DVD VCD CD
The icons on the heading bar show the playable discs for the
DVD VCD CD
function described under that heading.
: You can use this function with DVD video discs.
DVD
: You can use this function with VIDEO CDs.
VCD
: You can use this function with audio CDs.
CD
1) Start to record.
2) Press DVD/VCR to select DVD mode. The DVD
3) Play a disc.
4) Stop to play
Playing a Disc while the VCR section is
recording or standing by for timer recording
Follow step 1~5 on page 34.
• If the DVD/VCR is standing by for recording, turn on
the DVD/VCR.
indicator will light.
Follow step 3 ~ step 5 on page 42.
• Press PLAY if the DVD/VCR does not start to play a
disc automatically.
Press STOP to stop play back a disc.
43