Power On/Off Timing; Interfaces; I/O Cable - Toshiba SD-R6112 Product Specification

5.2. Power ON/OFF Timing (Target)
Figure 11 shows the initialization sequence
Power ON or
ATAPI-RST
System
Initialization
Focus Search
Spindle ON
Learning
Stand-by
"TEST UNIT
READY"
Command
6. Interface
(1) The interface is based on T13/1321D (AT Attachment with Packet Interface-5, ATA/ATAPI-5) Revsion 3
(Feb. 29, 2000), SFF-8020i (Small Form Factor Committee Specification of ATA-Packet Interface for
CD-ROMs) Revision2.6 (Nov. 27, 1995), SFF-8090i Ver.5, Rev. 1.4 (Oct. 17, 2001).
(2) 66 (ATAPI, ATA) commands are usable.
(3) The 2 MByte data buffer handles both high speed and low speed data transmission.
(4) The largest block size on playback is 2,647 Bytes.
The data length for each block is changeable by command.

6.1. I/O cable

Table1 shows the cable parameters.
Cable length
Driver IoL sink current for 5 V operation
Driver IoL sink current for 3.5 V operation
Driver IoH sink current
Driver capacitive loading
Max. 550 ms
Max. 4 s
Max. 5 s
CD:Typ. TBD s, DVD 2 Layer Typ. TBD s, Max.60 s
(Single Session Disc)
"Check Condition" Status
Figure 11 Initialization Sequence
Table 1 Cable parameters
"Command" Receivable
Min
0.46 m
12 mA
8 mA
-400
25 pF
15/28
"Read-Command"
Acceptable
"Good" Status
Max
A
µ
SD-R6112 Rev.1.0