Step 2: Connecting To Audio System - Toshiba HD-A35KC Owner's Manual

Preparation (continued)

Step 2: Connecting to audio system

Sound can output from connected audio system.
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.
Via HDMI output
You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your player
to an AV receiver with an HDMI audio input.
This connection requires selection of "Digital Out HDMI" (Step 16,
To HDMI OUTPUT
Via optical digital audio output
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a receiver
with Dolby Digital and DTS decoding capabilities and an optical digital input.
This connection requires selection of "Digital Out SPDIF" (Step 16,
Optical digital cable (not supplied)
To DIGITAL AUDIO OUTPUT
BITSTREAM/PCM OPTICAL
Via 5.1ch analog audio output
This connection requires selection of "Speaker Setting" (Step 16,
Audio cable
(not supplied)
To ANALOG AUDIO
OUTPUT 5.1CH
SURROUND
16
HD-A30KUKC_en.indd 16 HD-A30KUKC_en.indd 16
HDMI cable
HDMI cable
(not supplied)
(not supplied)
HDMI INPUT HDMI OUTPUT
AV amplifier
DIGITAL INPUT
OPTICAL
CENTER
L R SURROUND
AV amplifier
L R
FRONT
SUBWOOFER
page 22).
Caution
• When you are connecting (via the HDMI OUTPUT
jack) an AV decoder that does not have Dolby
Digital or DTS decoding capability, be sure to
set "Digital Out HDMI" (
or "Downmixed PCM". Otherwise, high volume
HDMI INPUT
sound may damage your hearing as well as the
speakers.
Note
• You may need to adjust the HDMI audio output
to match the capabilities of your AV amplifi er. In
HDMI compatible
this case, set "Digital Out HDMI" (
device
"PCM".
page 22).
*To use the optical digital output, use an
optical cable to connect this jack to an optical
audio input on a device capable of processing
Dolby Digital, DTS bitstream, or PCM audio.
AV amplifier
page 23).
page 22) to "PCM"
page 22) to
07.7.26 3:01:03 PM 07.7.26 3:01:03 PM