(1. 2) Changing Each Setting In; Ss (Synchro. Scan) Mode - Toshiba IK-TF9C Instruction Manual

(1. 2) Changing each setting in SS (synchro. scan) mode
Move up down
By pushing
MENU UP, DOWN
-- SHUTTER --
MODE
SS
PART
<MODE = SS>
(a) Changing the shutter speed setting
1 Set the " " to SS by pushing [MENU UP], [MENU DOWN] buttons.
2 Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
(b) Partial scanning setting
1 Set the " " to PART by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either OFF/30fps/40fps/E.30fps/E.40fps by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a charac-
teristic of CCD, and is not a symptom of malfunction.
14
Set by pushing
DATA UP, DOWN
SS
OFF
OFF
• Sutter mode MANU, SS, E.TRG
• Synchro. scanning setting
OFF : 2H/1592H 1590H/1592H OFF 2FRM 512FRM
30fps, E.30fps : 2H/1060H 1058H/1060H OFF 2FRM 512FRM
40fps, E.40fps : 2H/774H 772H/774H OFF 2FRM 512FRM
• Partial scanning switch
OFF/30fps/40fps/E.30fps/E.40fps