Apm Configuration - Asus E394S-IM-AA User Manual

4.4.5 APM Configuration

Allows you to configure the Advance Power Management (APM) settings.
ErP Ready
Allows you to switch off some power at S4+S5 or S5 to get the system ready
for ErP requirement. When set to [Enabled], all other PME options will be
switched off.
Configuration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]
Restore AC Power Loss
[S0] The system goes into ON state after an AC power loss.
[S5] The system goes into OFF state after an AC power loss.
[Last State] The system goes into either OFF or ON state, whatever the
system state was before the AC power loss.
Power On By PCI-E
Allows you to enable or disable the wake-on-LAN function for the onboard
LAN controller or other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By Ring
[Disabled] Disables the Ring devices to generate a wake event.
[Enabled] Enables the Ring devices to generate a wake event.
Power On By RTC
[Disabled] Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and
[Enabled]
Hour/Minute/Second will become user-configurable with set
values.
60 Single Board Computer