Connecting an audio system
This connection allows you to use an audio amplifier and external
speakers, and adjust the audio level using the TV's remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn
off the TV's built-in speakers (see "Turning off the built-in speakers" on
page 40.)
Note:
To hear sound when using an external audio amplifier, the volume of
both the TV and the amplifier must be set above 0 (zero.)
For example, if the volume of the TV is set to 0, you will not be able to
hear any sound, even the volume of the amplifier is at its highest level.
Amplifier
TV
J3S40121B(E)_P07-15
15
LINE IN
L
R
You will need:
• one pair of standard audio cables
15
24/02/2005, 6:06 PM