Toshiba SG-1801 Owner's Manual page 38

QUICK
CALLER ID CORDLESS TELEPHONE
REFERENCE
SG-1801
GUIDE
Read the Owner's Manual for details.
SETTING UP THE BASE UNIT
Raise the antenna to
Fasten the AC
vertical position. adaptor cord.
Single-Line
Telephone Jack
(RJ11C)
Telephone Line Cord
Power Outlet
(AC 120V, 60Hz)
AC Adaptor
NOTE: Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
CHARGING THE BATTERY PACK
1
Black Remove the battery cover by sliding it down.
Red
2
Plug the battery pack cord into its socket, observing
the correct polarity.
3
Place the battery pack, then close the battery
compartment cover.
4
Place the handset on the base unit. You can place
the handset with the dialpad facing up or down.
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
IN USE/
CHARGE
LED
Charging contacts
UCZZ69738BZ RC009817 Printed in China
SETTING / USING THE PHONE
Setting The Tone/Pulse Switch
Set the TONE/PULSE switch to TONE.
Place a call.
If the call does not connect with the TONE setting, set the
TONE/PULSE switch to PULSE
TONE/PULSE switch
Area Code
1
Press , then press 3 .
FUNCTION
2
Press SELECT/CHANNEL and enter your 3-digit area
code.
3
Press , then press .
SELECT/CHANNEL FUNCTION
Making a Call
1
Dial the phone number.
2
Press TALK .
3
TALK
Press to hang up.
FLASH
TALK CID
Answering a Call
L.D.
Press TALK and speak. 3
NOTE: To indicate Caller ID data, let the
TONE/
TONE
phone ring twice before you answer the call.
RDL/P
FUNCTION SELECT DELETE
FUNCTION
SELECT/CHANNEL
CALLER ID SERVICE
Setting Up Caller ID
To use Caller ID/Caller ID on Call Waiting features, you must subscribe to both Caller
ID/Caller ID on Call Waiting services provided by your local telephone company.
MEM
CID
TALK
L.D. LOCAL
1
TONE
RDL/P FUNCTION SELECT DELETE
FUNCTION
Selecting Caller ID Options
LOCAL
1
Press FUNCTION .
2
Press , , or 2 to move the pointer to CIDCW.
3
Press to change the option setting.
SELECT/CHANNEL
4
Press FUNCTION and return the handset to the base.
See page 15 in the owner's manual for more information.
Making a Call with Caller ID Data
1
Press CID , then press or
2
Press TALK , then the displayed number will be dialed.
Note: For long distance calls, you need a prefix "1" and the area code.
Press L.D./1 and LOCAL/3 to add or cancel "1" and the area code
before you press TALK .
Storing Caller ID Data to Speed-Dial Memory
1
Press CID , then press or
Speed-dial memory.
,
2
Press , then press ,
MEM
3
CID
Press SELECT/CHANNEL . A confirmation beep sounds and the Caller ID data is
stored.
FLASH Press to return to standby mode.
CID
3
Deleting Caller ID Data
DELETE
1
Press CID , then press or
delete from the memory.
SELECT/CHANNEL
2
Press DELETE , then press
3
Press SELECT/CHANNEL or
4
Press CID to return to standby mode.
Call Waiting Options
1
When you receive a call waiting call, press
2
Press or to select an option.
3
Press SELECT/CHANNEL to confirm.
4
TALK
Press or return the handset to the base to end the call.
See page 33 in the owner's manual for more information.
For more detailed instructions and examples, please refer to the owner's manual.
to display the number you want to dial.
to display the number you want to store into
or enter a memory location number.
to display the Caller ID number you want to
or to select Yes or No.
DELETE .
FUNCTION for a list of options.