INSTALLATION
SETTING THE TONE/PULSE SWITCH
Set the TONE/PULSE switch to TONE.
If the call does not connect with the TONE setting, set the
TONE/PULSE switch to PULSE.
TONE/PULSE switch
SETTING OR CANCELING THE AUTO TALK FUNCTION
If the handset is placed on the base unit, you can answer a call by
simply lifting the handset from the base unit (Auto Talk). If the handset
is not on the base unit, you can answer a call by pressing any one of
the buttons (Any-key Answer function). When the Auto Talk function is
set to ON, the Any-key Answer function is also set to ON.
When the Auto Talk function is set to OFF, you can lift the handset and
view the caller ID information before choosing to answer. This function
is preset to OFF at the factory prior to shipment.
1
Press
FUNCTION
current setting.
2
Press
SELECT
the On/Off setting will be switched.
3
Press
FUNCTION
standby mode.
14
SELECT
FUNCTION
. The LCD displays the
. Each time you press
. The handset is put in
s s
,
SELECT
s s