Download Print this page
Toshiba MK4008GAH User Manual
Toshiba MK4008GAH User Manual

Toshiba MK4008GAH User Manual

1.8-inch hard disk drive

Advertisement

Quick Links

TOSHIBA AMERICA INFORMATION SYSTEMS
STORAGE DEVICE DIVISION
IRVINE, CALIFORNIA
MK4008GAH (HDD1744)
1.8-INCH HARD DISK DRIVE
USER MANUAL

Advertisement

loading

Summary of Contents for Toshiba MK4008GAH

  • Page 1 TOSHIBA AMERICA INFORMATION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK4008GAH (HDD1744) 1.8-INCH HARD DISK DRIVE USER MANUAL...
  • Page 2: Table Of Contents

    CONTENTS Introduction...1 Setup ...2 Using the HDD ...3 Specifications ...4 Drive Connectors...6...
  • Page 3: Introduction

    INTRODUCTION – MK4008GAH (HDD1744) HARD DISK DRIVE General Features • 1.8" sized drive • 2 Platter • 40 Gigabytes • 8mm High • 15ms Average Seek Time • ATA-6 Interface • Ultra DMA 100 • 2MB Buffer • Rotational speed of 4,200rpm •...
  • Page 4: Setup

    SETUP – MK4008GAH (HDD1744) HARD DISK DRIVE Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive.
  • Page 5: Using The Hdd

    USING THE HARD DISK DRIVE – MK4008GAH (HDD1744) HARD DISK DRIVE Backing up Data Files To avoid data loss, regularly back up the data files on the hard disk drive.
  • Page 6: Specifications

    SPECIFICATIONS –MK4008GAH (HDD1744) HARD DISK DRIVE General Model Interface Functionality Formatted Capacity Rotational Speed Avg. Rotational Latency Spin-up Time Buffer Seek Time Average Maximum Internal Transfer Rate Host Transfer Rate Ultra DMA mode PIO Mode Interleave Factor Internal Drive Characteristics...
  • Page 7 Physical Height Width Depth Weight Regulatory The drive satisfies the following standards: Underwriters Laboratories (UL) Canadian Standard Association (CSA) C22.2 No. 950 TUV Rheinland BSMI 0.315 (8.0mm) 2.13" (54.0mm) 3.09" (78.5mm) 2.08oz (59g) typ 1950 EN 60 950 3902C799...
  • Page 8: Drive Connectors

    DRIVE CONNECTORS –MK4008GAH (HDD1744) HARD DISK DRIVE Figure 1. MK4008GAH HDD - INTERFACE CONNECTOR Interface Connector...
  • Page 9 Interface Signals Note: Symbol (-) in front of signal indicates negative logic. DRIVE INTERFACE SIGNALS SIGNAL RESERVED RESERVED - RESET DD 7 DD 6 DD 5 DD 4 DD 3 DD 2 DD 1 DD 0 GROUND GROUND -DIOW/STOP - DIOR/ - HDMARDY HSTROBE IORDY/...

This manual is also suitable for:

Hdd1744