Installing The Driver And Utility Software; Windows 95 Or 98 - ActionTec Parallel Port Flash Card Reader User Manual

Parallel port flash card reader
Table of Contents

Advertisement

Step 5
Reconnect the power cord you disconnected in step 1 and turn on the com-
puter. Look at the front of the CameraConnect Pro during start-up.
Do you see a green light? If the green light is on and you receive no keyboard errors,
you have correctly installed the power-tap to your keyboard. Both the keyboard and
printer pass-through cables on the CameraConnect Pro must be attached to the proper
connectors on your computer. If you do not see a green light on the front of the
CameraConnect Pro, turn off the power and check the method you used to connect
your keyboard and the keyboard adapter.

Installing the Driver and Utility Software

Windows 95 or 98

Step 1
Close any applications you may have running. Insert the installation disk
into your computer's floppy disk drive. On the Windows taskbar, click Start. On the
Start menu, click Settings, then click Run. In the window that appears, type
A:\setup.exe
and press ENTER.
Step 2
The setup utility will display its welcome screen. Click Next.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cameraconnect pro

Table of Contents