Table of Contents
Advertisement
50 Listing Services
6.3 Transferring receiver data
To type a space, select the Space key. To type lower case letters
or numerals, select the Other key. To delete a letter, put the
cursor on a desired letter at the input line and then select the
Del key. You must select the Save key to complete naming;
otherwise, if you press the
To rename a group, put the highlight bar on a desired group
you wish to rename and press the
screen keyboard will appear as above.
To delete a group, put the highlight bar on a desired group you
wish to delete and press the
box appears. If you select Yes, it will be deleted.
Similarly, you can delete a favorite entry with the
in the favorite list.
To add radio services, press
tries will be listed in the service list. To recall the television
service list after adding radio services, press
With your favorite service list, you can select your favorite ser-
vices more easily. Refer to §
The digital receiver retains such data as follows:
• Service list
• Favorite list
• Preference settings
It is possible to transfer receiver data to your digital receiver
from another same digital receiver connecting them with a RS-
232 cable.
You can move the highlight key horizon-
tally with the
V
tically with the
P
ing the
button on a key enters its letter
OK
in the input line.
button, it will not be named.
EXIT
button; then a confirmation
button; then radio service en-
5.2
for more information.
and
buttons and ver-
V
and
buttons. Press-
P
button; then the on-
OK
button again.
button
Advertisement
Table of Contents
