Installation; Site Preparation; Unpacking The Switch; Package Contents - Dell PowerConnect M6220 Series Getting Started Manual

Installation

This document provides basic information to install, configure, and operate Dell™ PowerConnect™
M6220 systems. For more information, see the Hardware Owner's Manual, which is available on
your User Documentation CD, or check the Dell Support web site at support.dell.com for the latest
updates on documentation and firmware.

Site Preparation

Before installing the switch, make sure that the chosen installation location meets the site
requirements specified in the Hardware Owner's Manual.

Unpacking the Switch

Package Contents

When unpacking each switch, make sure that the following items are included:
• One PowerConnect switch
• One USB type A-to-DB9 serial cable
• User Documentation CD
• Getting Started Guide
• Product Information Guide

Unpacking Steps

NOTE:
Before unpacking the switch, inspect the container and immediately report any evidence of damage.
Place the container on a clean, flat surface and cut all straps securing the container.
1
Open the container or remove the container top.
2
Carefully remove the switch from the container and place it on a secure and clean surface.
3
Remove all packing material.
4
Inspect the product and accessories for damage.
5
Getting Started Guide
5