Topcom Skyr@cer WBR 354G Quick Installation Manual page 9

Topcom Wireless Broadband Router WBR 354G
• Now you can change the LAN settings:
- Click Next to proceed
- Select your Connection Type
- Click Next to proceed
- Obtain IP automatilally (DHCP client): this connection is mostly used for connecting the WBR 354G to a cable
modem.
- Fixed IP address: for connections with fixed WAN IP address.
- enter the WAN IP, Subnet Mask, Gateway and DNS addresses.
- Click Next to proceed.
- PPPoE to obtain IP automatically: mostly used for connecting the WBR 354G to an ADSL-Ethernet Bridge with
PPPoE dial up.
Topcom Wireless Broadband Router WBR 354G
- The LAN IP address and Subnet mask can be changed.
- The router DHCP server can be Disabled / Enabled
- The DHCP range can be set.
9