Minutes Conversation Timer; Erasing One Telephone Number; Headset Connection; Caller-Id Function (Clip) - Topcom COCOON 115 115 User Manual

10

5.17 15 Minutes conversation timer

To avoid that you would forget to end a conversation or that you accidentally press the line
button without having a conversation, you have the possibility to activate a 15 minutes
conversation timer. This warns you after 15 minutes of conversation by means of beeps (last
30 seconds). To continue your conversation and to avoid the connection from being broken
automatically, press a numerical button (0-9) as soon as you hear the first beeps.
To activate/deactivate this function:
• Press the Set button
• Press numerical button '9'.
• Press numerical button '1' to activate or '2' deactivate this function.
• Press the Memory button
Default setting: off

5.18 Headset connection

You can connect a headset with a 3 pole jack plug of 2,5mm on the right side of the handset.
When the headset is connected, you can only hear and talk through the headset. The headset
microphone can still be muted by the Mute key.

6 CALLER-ID FUNCTION (CLIP)

The Cocoon 115 displays the telephone numbers of incoming calls. This function is only
possible if you are subscribed to a telephone operator that provides this service. Contact your
telephone provider for more information. When you receive a call, the numbers are saved in
a call list. This list can hold 12 telephone numbers (each of max. 16 digits).

6.1 New calls

When you've received a new unanswered call, the CLIP symbol

6.2 Consulting the Call list

When you consult the Call list, you will notice that the list always starts with the last call
received.
• Press the
• The number of new calls (ne) and the total number of calls (tot) appear on the display.
• Use numerical buttons
• When you reach the beginning of the Call list, 'END OF CID' is shown on the display.
• When you reach the end of the Call list, 'HEAD OF CID' is shown on the display.
• When the telephone number is longer than the available space on the display, '-' appears
at the end of the telephone number. Press button '2' to see the remainder of the number.
The CID sequence number will also be shown [x].
• You can leave the Call list by pressing the

6.3 Calling a number from the Call list

• Scroll through the Call list until the desired number is shown on the display.
• Press the Line button

6.4 Erasing a number from the Call list

(a) Erasing one telephone number
• Scroll through the Call list until the desired number is shown on the display.
.
. The unit emits a confirmation tone.
button
'1' or
. The number will be dialled automatically.
'3' to scroll through the list.
button
COCOON 115
appears on the display.