Download Print this page

Wharfedale Pro FOCUS-12M User Manual

Advertisement

Quick Links

WHARFEDALE PRO FOCUS-12M USER MANUAL
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS – Carefully and become familiar with the features and functions of these products before operating them.
2. RETAIN THESE INSTRUCTIONS – For future reference.
3. COMPLY WITH ALL WARNINGS – Non-compliance may void warranty of the product.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable to establish and follow a routine for
powering up and powering down a sound system. With all system components connected, turn on source equipment (mixers, signal
processors, record and playback units etc.) BEFORE powering up amplifiers. Transient voltages from powering up source equipment can
damage speakers if amplifiers are already turned on. Make sure that amplifier volumes are set to their minimum settings and power up any
system amplifiers LAST. It is recommended that all system components be allowed to stabilize for few seconds before any source signals are
introduced or level setting adjustments are made. Similarly, when shutting systems down, turn all amplifiers off first, before powering down
any other system components.
5. CABLES – Do not use shielded or microphone cables for connection between amplifiers and speakers. Use only approved speaker cables
with proper connectors.
6. RIGGING – SUSPENDING – MOUNTING – RIGGING, Suspending and mounting of these speaker systems can expose members of the public
to serious health risks and even death. Under no circumstances attempt to rig, suspend or otherwise mount these speakers unless you are
fully qualified and certified to do so by relevant local, state and national authorities. All relevant safety regulations must be followed. If you are
not properly qualified or do not know of pertinent regulations, consult qualified personnel for advice.
7. CAUTION – These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement
and operation to avoid exposure to excessive volume levels. Permanent hearing damage can result when operated to extreme levels.
8. SERVICE – There are no user serviceable parts inside this product. Users should not attempt to service this product. Warranty nullification
could result if this is attempted.
INTRODUCTION
The Wharfedale Pro FOCUS-12M is the result of many years of experience in the use, design and manufacture of professional loudspeaker
products. We take great pride in engineering and building every Wharfedale Pro loudspeaker and would like to thank you for entrusting us
with your sound solutions.
With solid 15mm birch plywood construction and custom-made transducers, the FOCUS-12M floor monitor has been designed to ensure
extreme onstage conditions.
FOCUS-12M FEATURES
12" Custom Wharfedale Pro LF driver with 3.0" voice coil
2" voice coil HF compression driver with 1.4" exit
90° x 40° dispersion
500w Continuous
1000w Programme
2000w Peak
132dB Max SPL @ 1m
15mm Russian birch plywood construction.
Wharfedale Professional
IAG House 13/14 Glebe Road Huntingdon Cambridgeshire PE29 7DL UK
www.wharfedalepro.com
Wharfedale Professional reserves the right to alter or improve specifications without notice.
All rights reserved © 2019 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group.

Advertisement

loading

Summary of Contents for Wharfedale Pro FOCUS-12M

  • Page 1 INTRODUCTION The Wharfedale Pro FOCUS-12M is the result of many years of experience in the use, design and manufacture of professional loudspeaker products. We take great pride in engineering and building every Wharfedale Pro loudspeaker and would like to thank you for entrusting us with your sound solutions.
  • Page 2: Line Drawings

    Wharfedale Professional IAG House 13/14 Glebe Road Huntingdon Cambridgeshire PE29 7DL UK www.wharfedalepro.com Wharfedale Professional reserves the right to alter or improve specifications without notice. All rights reserved © 2019 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group.