Page 1
CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. 1-888-936-4266 CALL TOLL-FREE: Mon.–Fri., 8:00 until 17:00 ET (excluding holidays) OR E-MAIL US: customerservice@iconcanada.ca CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference. www.weslo.com...
If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. WESLO is a registered trademark of ICON IP, Inc.
All manuals and user guides at all-guides.com IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical exerciser before using your elliptical exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
8.25 ellipti- cover of this manual. To help us assist you, note the ® cal exerciser. The WESLO 8.25 elliptical exerciser product model number and serial number before con- provides an impressive selection of features designed tacting us. The model number and the location of the...
All manuals and user guides at all-guides.com ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own Phillips screwdriver , adjustable wrench , and rubber mallet...
All manuals and user guides at all-guides.com To make assembly easier, read the assembly tips on page 5 before you begin assembling the elliptical exerciser. Attach the Rear Stabilizer (35) to the Frame (1) with two M10 x 75mm Carriage Bolts (58) and two M10 Locknuts (84).
Page 7
All manuals and user guides at all-guides.com 4. Identify the Left Pedal Arm (21), which is marked with a sticker. Attach a Pedal (19) to the Left Pedal Arm with three M4 x 19mm Screws (68) and three Star Washers (85). Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way.
All manuals and user guides at all-guides.com 6. Apply a generous amount of grease to the axle on the left Upper Body Leg (6). Then, apply grease to a Large Wave Washer (20) and slide it onto the axle. Apply a generous amount of grease to the Left Crank Arm (42).
All manuals and user guides at all-guides.com 9. While another person holds the Console (10) near the Upright (2), connect the Upper Wire Harness (18) to the wire harness on the Console. Tip: Be careful not to pinch the wire harnesses. Attach the Console (10) to the Upright (2) with four M4 x 16mm Screws (60).
All manuals and user guides at all-guides.com HOW TO USE THE ELLIPTICAL EXERCISER HOW TO MOVE AND LEVEL THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER EXERCISER To move the elliptical exerciser, stand in front of it, To mount the elliptical exerciser, firmly hold the upper place one foot against one of the wheels, and firmly body arms and carefully step onto the pedal that is in hold the upper end of the upright.
Page 11
All manuals and user guides at all-guides.com CONSOLE DIAGRAM FEATURES OF THE CONSOLE To track your walking exercise, the console also features the MyTracks™ StepCounter program that allows you The console offers a selection of features designed to to enter the number of steps that you plan to pedal, make your workouts more effective.
Page 12
All manuals and user guides at all-guides.com HOW TO USE THE MANUAL MODE also show your heart rate when you use the hand- grip pulse sensor. Note: When a calorie program is 1. Press any button on the console or begin ped- selected, the display will show the number of calo- aling to turn on the console.
Page 13
All manuals and user guides at all-guides.com HOW TO USE A SMART PROGRAM As you exercise, the display will prompt you 1. Press any button on the console or begin ped- to keep your pedaling aling to turn on the console. pace near the pace setting for the current When the console is turned on, the display will...
Page 14
All manuals and user guides at all-guides.com HOW TO USE A CALORIE PROGRAM 2. Select the MyTracks™ StepCounter program. 1. Press any button on the console or begin ped- To select the aling to turn on the console. MyTracks™ StepCounter program, When the console is turned on, the display will press the 10,000 light.
All manuals and user guides at all-guides.com MAINTENANCE AND TROUBLESHOOTING Inspect and properly tighten all parts of the elliptical Switch. Loosen, but do not remove, the indicated exerciser regularly. Replace any worn parts immedi- M4 x 16mm Screw (60). Slide the Reed Switch slight- ately.
All manuals and user guides at all-guides.com EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning time. During the first few minutes of exercise, your this or any exercise program, consult your body uses carbohydrate calories for energy.
PART LIST—Model No. Model No. WLCCEL2309.0 All manuals and user guides at all-guides.com R0809A Key No. Qty. Description Key No. Qty. Description Frame Flywheel Upright Flywheel Axle Front Stabilizer Flywheel Bearing Left Upper Body Arm “C” Magnet Right Upper Body Arm “C”...
All manuals and user guides at all-guides.com ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...