Description Of Controls - Zenith P60W38 Service Manual

All manuals and user guides at all-guides.com

DESCRIPTION OF CONTROLS

Controls
Controls
- This is a simplified representation of a typical front panel.
The Front Panel Controls shown here may be somewhat different from your monitor.
ON/OFF
Main Power Button
Connection Options
Connection Options
RS-232C INPUT
DVI INPUT RGB INPUT AUDIO INPUT
(CONTROL/SERVICE)
1 2
1. RS-232C INPUT (CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
2. DVI (Digital Visual Interface) INPUT/
RGB INPUT/AUDIO INPUT JACKS
Connect the monitor output connector from a PC to the
appropriate input port.
3. RGB OUTPUT PORT
You can watch the RGB signal on another monitor, connect
RGB OUTPUT to another monitor's PC input port.
4. REMOTE CONTROL
Connect your wired remote control to the remote control
port on the Monitor.
5. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to 'Speaker & Speaker
Stand' manual.
Front Panel Controls
Front Panel Controls
INPUT SELECT Button
Power Standby Indicator
Illuminates red in standby
mode. Illuminates green when
the Monitor is turned on.
Back Connection Panel
Back Connection Panel
( ) ( ) ( ) ( )
R L
RGB OUTPUT REMOTE CONTROL
EXTERNAL SPEAKER
3 4 5
6. COMPONENT INPUT/AUDIO INPUT JACKS
Connect a component video/audio device to these jacks.
7. S-VIDEO INPUTS
Connect S-Video out from an S-VIDEO VCR or other S-
Video device to the S-VIDEO input.
AUDIO/VIDEO INPUT JACKS
Connect audio/video out from external equipment to these
jacks.
8. POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
- 4 -
Sub Power Button
VOLUME ( F , G ) Buttons
Remote Control Sensor
Y P P
B R R
R AUDIO L
VIDEO
AUDIO INPUT COMPONENT INPUT S-VIDEO AUDIO INPUT
INPUT
6 7
AUDIO L (MONO)
AC INPUT
8