Checking The Remaining Battery Power - Panasonic FZ-G1 Series Operating Instructions - Reference Manual

Battery indicator
Green The battery pack can be replaced. (When the battery latch (C) is slid with the AC adaptor disconnected)
Only for model with built-in bridge battery
The battery pack can be replaced. (When the AC adaptor disconnected, the built-in bridge battery discharges.)
Blinking red slowly The battery pack cannot be replaced. (When the battery latch (C) is slid with the AC adaptor disconnected)
Blinking red The built-in bridge battery has deteriorated. Contact Panasonic Technical Support.
Not lit The battery pack can be replaced (While the AC adaptor connected, shutdown, hibernation)
N O T E
Once the battery is fully charged, the computer performs recharging only when the battery level becomes less than approximately 95%, so over-
n
charging is avoided.
When [LED] is set to [OFF] on the [Concealed Mode Configuration] menu, LED does not light.
n
Charging
When connecting the computer to a power outlet, the battery charging starts automatically.
The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time.

Checking the Remaining Battery Power

To check the remaining battery power on the screen
(After signing in to Windows)
1. Touch or
The remaining battery power is displayed.
To check the remaining battery power using the battery indicator
(When the power is off or in sleep or hibernation)
1. Disconnect the AC adaptor.
2. Press the
button (A) and confirm the battery indicator (B).
on the task tray.
Battery status
- 31 -