Download
Share
Print this page
NCR 7350-K140 Kit Instructions
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Industrial Equipment
  5. 7350-K140
  6. Kit instructions
NCR 7350-K140 Kit Instructions

NCR 7350-K140 Kit Instructions

2-bag bagwell upgrade
Hide thumbs

Advertisement

Quick Links

Kit Instructions
2-Bag Bagwell Upgrade
7350-K140/K141/K142/K143/K145/K964
Issue C

Advertisement

loading

Related Manuals for NCR 7350-K140

Summary of Contents for NCR 7350-K140

  • Page 1 Kit Instructions 2-Bag Bagwell Upgrade 7350-K140/K141/K142/K143/K145/K964 Issue C...
  • Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a customer’s installed software exactly.
  • Page 3 K140Cover Revision Record Issue Date Remarks Jan 2011 • First Issue • 50DR20059 Aug 2011 • Added steps on the removal and installation of stainless steel lower bumpers if included in the kit. • Added steps on the removal and installation of the rear frame support bracket.

  • Page 5: Table Of Contents

    7350 2-Bag Bagwell Upgrade This publication provides procedures for installing a 2-Bag Bagwell to a 7350 NCR SelfServ™ Checkout. Kit Contents Depending on the color variant of the Bagwell, refer to the following sections for information about kit contents: •...

  • Page 6: 7350-K140 2-Bag Bagging Area (G/11)

    7350 2-Bag Bagwell Upgrade 7350-K140 2-Bag Bagging Area (G/11) Part Number Description 497-0526236 2-Bag Bagging Area (G/11)
  • Page 7 7350 2-Bag Bagwell Upgrade Part Number Description 795-0283601 2-Bag Door Assembly (G/11) 795-0134201 2-Bag Backsplash Panel (G/11) 795-0134101 2-Bag Front Panel (G/11) 795-0133301 2-Bag Bagwell Side Panel (G/11) 006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs) 497-0472268 2-Bag Scale Tray with Bag Rack Hardware 497-0466205 Skirt - 2-Bag BOM Package 497-0525620...

  • Page 8: 7350-K141 2-Bag Bagging Area (Battleship Gray)

    7350 2-Bag Bagwell Upgrade 7350-K141 2-Bag Bagging Area (Battleship Gray) Part Number Description 497-0526239 2-Bag Bagging Area (Battleship Gray)
  • Page 9 7350 2-Bag Bagwell Upgrade Part Number Description 795-0283616 2-Bag Door Assembly (Battleship Gray) 795-0134216 2-Bag Backsplash Panel (Battleship Gray) 795-0134116 2-Bag Front Panel (Battleship Gray) 795-0133316 2-Bag Side Panel (Battleship Gray) 006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs) 497-0472268 2-Bag Scale Tray with Bag Rack Hardware 497-0466205 Skirt - 2-Bag BOM Package...
  • Page 10 7350 2-Bag Bagwell Upgrade Part Number Description 497-0518276 2-Bag Core Side Lower Back Bumper 497-0518277 2-Bag Wrap-Around Side Corner Bumper 497-0455678 2-Bag Rear Frame Support Bracket * 497-0423108 Kit Instructions (Reference Sheet) * Items marked with an asterisk are not called out on the image.

  • Page 11: 7350-K142 2-Bag Bagging Area (Dark Red)

    7350 2-Bag Bagwell Upgrade 7350-K142 2-Bag Bagging Area (Dark Red) Part Number Description 497-0526240 2-Bag Bagging Area (Dark Red)
  • Page 12 7350 2-Bag Bagwell Upgrade Part Number Description 795-0283618 2-Bag Door Assembly (Dark Red) 795-0134218 2-Bag Backsplash Panel (Dark Red) 795-0134118 2-Bag Front Panel (Dark Red) 795-0133318 2-Bag Bagwell Side Panel (Dark Red) * 795-0281618 Hole Cover Label (Dark Red) 006-8604541 Screw, 1/4-20x1/2, Pan Head, Phillips (4pcs) 497-0457054 Black Nylon Spacer 15mm OD x 10.4mm ID x 10mm L (6pcs)

  • Page 13: 7350-K143 2-Bag Bagging Area (Ral 9001 Cream)

    7350 2-Bag Bagwell Upgrade 7350-K143 2-Bag Bagging Area (RAL 9001 Cream) Part Number Description 497-0526238 2-Bag Bagging Area (RAL 9001 Cream)
  • Page 14 1-10 7350 2-Bag Bagwell Upgrade Part Number Description 795-0283609 2-Bag Door Assembly (RAL 9001 Cream) 795-0134209 2-Bag Backsplash Panel (RAL 9001 Cream) 795-0134109 2-Bag Front Panel (RAL 9001 Cream) 795-0133309 2-Bag Bagwell Side Panel(RAL 9001 Cream) 006-8604541 Screw -1/4-20x1/2, Pan Head, Phillips (4pcs) 497-0472268 2-Bag Scale Tray with Bag Rack Hardware 497-0466205...

  • Page 15: 7350-K145 2-Bag Bagging Area (Walmart Blue)

    7350 2-Bag Bagwell Upgrade 1-11 7350-K145 2-Bag Bagging Area (Walmart Blue) Part Number Description 497-0526496 2-Bag Bagging Area (Walmart Blue)
  • Page 16 1-12 7350 2-Bag Bagwell Upgrade Part Number Description 795-0283612 2-Bag Door Assembly (Walmart Blue) 795-0134212 2-Bag Backsplash Panel (Walmart Blue) 795-0134112 2-Bag Front Panel (Walmart Blue) 795-0133312 2-Bag Bagwell Side Panel (Walmart Blue) * 795-0281612 Hole Cover Label (Walmart Blue) 006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs) 497-0525620...

  • Page 17: 7350-K964 2-Bag Bagging Area (Ral 7021 Black)

    7350 2-Bag Bagwell Upgrade 1-13 7350-K964 2-Bag Bagging Area (RAL 7021 Black) Part Number Description 497-0526237 2-Bag Bagging Area (RAL 7021 Black)
  • Page 18 1-14 7350 2-Bag Bagwell Upgrade Part Number Description 795-0283607 2-Bag Door Assembly (RAL 7021 Black) 795-0134207 2-Bag Backsplash Panel (RAL 7021 Black) 795-0134107 2-Bag Front Panel (RAL 7021 Black) 795-0133307 2-Bag Bagwell Side Panel (RAL 7021 Black) 006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs) 497-0472268 2-Bag Scale Tray with Bag Rack Hardware 497-0466205...

  • Page 19: On The Next Page

    7350 2-Bag Bagwell Upgrade 1-15 Installation Procedures Installing the Bagwell upgrade involves the following procedures: • Removing Existing Bagwell on the next page. • Changing Bagwell Orientation on page 21. Note: This procedure may be optional. • Installing New Bagwell on page 28. •...
  • Page 20 1-16 7350 2-Bag Bagwell Upgrade Removing Existing Bagwell To remove an existing 2-Bag Bagwell, follow these steps: Note: To remove a 1-Bag Bagwell refer to 7350-K120/K121/K122/K123/K125/K962/K967 2-Bag Bagwell Upgrade. To remove a 3-Bag Bagwell refer to 7350- K160/K162/K164/K165/K996 3-Bag Bagwell Upgrade.
  • Page 21 7350 2-Bag Bagwell Upgrade 1-17 2. Remove the clear plastic deflectors from the Backsplash and side of the Core. Note: Leave the Core side deflector in its place if the new Bagwell is attached on the same side. Note: The 7350-K145 (Walmart Blue) variant does not have plastic deflectors and bumpers.
  • Page 22 1-18 7350 2-Bag Bagwell Upgrade 3. Disconnect the following cables: Note: The 7350-K145 (Walmart Blue) variant uses Top Spacer Brackets instead of a Scale Controller and Scale Pods. • USB Power Cable from the Scale Controller • Local Area Network (LAN) Cable from the Customer Interface •...
  • Page 23 7350 2-Bag Bagwell Upgrade 1-19 5. Remove the upper rear screw attaching the Backsplash to the Core. 6. Remove the Bagwell by doing the following: a. Remove the two (2) bottom screws attaching the Bagwell to the Core. Screws are located on either side of power strip.
  • Page 24 1-20 7350 2-Bag Bagwell Upgrade b. Loosen the two (2) upper screws, but do not remove. c. Lift Bagwell up and away from Core. The upper screw heads will pass through the key holes in the Bagwell side support. Note: The two (2) upper screws may be left in place if a new Bagwell will be installed in the same orientation.
  • Page 25 7350 2-Bag Bagwell Upgrade 1-21 Changing Bagwell Orientation To change the Bagwell from right hand to left hand orientation, follow these steps: Note: These steps should be done before attaching the Bagwell to the Core. 1. Detach the Scale Tray from the Bagwell by removing four (4) flat head screws.
  • Page 26 1-22 7350 2-Bag Bagwell Upgrade 2. Remove the bumpers by doing the following: Note: Do not remove the front access door bumper a. Detach the lower-rear bumper from the Bagwell by removing two (2) flat head screws. b. Detach the Backsplash the Bagwell by removing seven (7) screws.
  • Page 27 7350 2-Bag Bagwell Upgrade 1-23 c. Detach rear support frame from the Bagwell by removing four (4) nuts. d. Detach the upper bumper from the Bagwell by removing six (6) flat head screws and spacers, as shown in the image below.
  • Page 28 1-24 7350 2-Bag Bagwell Upgrade e. Detach the wrap-around side bumper by removing three (3) flat head screws and spacers, as shown in the image below. 3. Remove two (2) nuts securing the front panel to the Bagwell frame located at the inside corner posts.
  • Page 29 7350 2-Bag Bagwell Upgrade 1-25 4. Pull down the front panel and then pull out to disengage from the slots in the Bagwell frame base, as shown in the image below. 5. Install the front panel on the opposite side of the Bagwell and secure it with two (2) nuts.
  • Page 30 1-26 7350 2-Bag Bagwell Upgrade 6. Install the bumpers to the Bagwell by doing the following: Note: Do not reinstall Scale Tray, Backsplash panel, and rear lower bumper (if present). For more information, refer to Installing New Bagwell on page 28. a.
  • Page 31 7350 2-Bag Bagwell Upgrade 1-27 c. Attach the wrap-around bumper to the Bagwell by using three (3) flat head screws and spacers.
  • Page 32 1-28 7350 2-Bag Bagwell Upgrade Installing New Bagwell To install the new Bagwell, follow these steps: Note: If changing the Bagwell orientation (Left-Hand or Right-Hand), ensure that the orientation is changed before installing the new Bagwell to the Core. 1. Remove the Scale Tray from the Bagwell. 2.
  • Page 33 7350 2-Bag Bagwell Upgrade 1-29 3. Lower all the leveling feet of the Bagwell slightly beyond the height of the casters to assist in lining up the Core and the Bagwell mounting holes. 4. Install the new Backsplash panel using seven (7) screws.
  • Page 34 1-30 7350 2-Bag Bagwell Upgrade 5. If not already present, partially thread the two (2) upper screws on the Bagwell side of the Core. Leave approximately ¼ inch of the threads exposed. 6. Mate the new Bagwell to the Core by lifting the frame up and over the partially threaded screws.
  • Page 35 7350 2-Bag Bagwell Upgrade 1-31 7. Tighten the two (2) screws and install the two (2) lower screws that connect the Bagwell and the Core. 8. Install the upper rear screw attaching the Backsplash panel to the Core. Note: Adjust the leveling feet if the slot does not line up well.
  • Page 36 1-32 7350 2-Bag Bagwell Upgrade 9. If present, install rear lower bumper using two (2) plastic spacers and two (2) flat head screws on the Backsplash. 10. Route the following cables through the cable access hole: Note: The 7350-K145 (Walmart Blue) variant uses Top Spacer Brackets instead of a Scale Controller and Scale Pods.
  • Page 37 7350 2-Bag Bagwell Upgrade 1-33 11. Remove four (4) yellow shipping spacers from the scale pods before installing the Scale Tray. Note: The 7350-K145 (Walmart Blue) variant uses Top Spacer Brackets instead of a Scale Controller and Scale Pods.
  • Page 38 1-34 7350 2-Bag Bagwell Upgrade 12. Install the Scale Tray on the Bagwell using four (4) flat head screws. Note: Ensure that the surface marked BACK is facing towards the back of the unit. ! Important: Use the correct screw length. Tighten the screws from six to eight pounds.
  • Page 39 • Level the unit and attach the bag racks, if necessary. For more information, refer to the 7350 NCR SelfServ™ Checkout (7350) Hardware Installation Guide (B005– 0000–1826). • Test scale operation in PML. For more information, refer to the NCR FastLane SelfServ™ Checkout Profile Manager Lite (PML) User Guide for ADD 3.X (B005- 0000-2279).
  • Page 40 1-36 7350 2-Bag Bagwell Upgrade Installing Bagwell Skirt Panels To install Bagwell skirt panels, follow these steps: 1. On the side of the Bagwell, do the following: a. Attach the skirt panel to the skirt brackets by aligning the open slots in the skirt panel with the screw holes in the skirt bracket.
  • Page 41 7350 2-Bag Bagwell Upgrade 1-37 2. On the front and back of the Bagwell, do the following: Note: The front and back skirt panels of the Bagwell must be installed after the side skirt panel of the Bagwell. a. Attach the front and back skirt panels to the skirt brackets by aligning the open slots of both skirt panels with the screw holes in the securing bracket.
  • Page 42 1-38 7350 2-Bag Bagwell Upgrade Routing Cables To route cables when installing a new Bagwell follow these steps: Note: If a new Bagwell is installed to a No-Bag unit, refer to Routing Cables for No-Bag unit on page 41 first for additional steps. Note: Use the new pre-installed USB Power Cable only when installing a new Bagwell to a No-Bag unit.
  • Page 43 7350 2-Bag Bagwell Upgrade 1-39 2. Tie the USB Power Cable with cable ties to hold it in place. 3. Route the Local Access Network (LAN) Cable from the Core to the Customer Interface through the smaller opening of the Bagwell frame as shown in the image below.
  • Page 44 1-40 7350 2-Bag Bagwell Upgrade 4. Route the AC Power Out and AC Power In cables and then connect to the Power Strip, as shown in the image below.
  • Page 45 7350 2-Bag Bagwell Upgrade 1-41 Routing Cables for No-Bag unit These are additional steps in routing cables when upgrading a No-Bag unit to a 1-Bag unit: Note: Use the new USB Power Cable. Route the USB Power Cable to the E-Box first before installing new Bagwell.
  • Page 46 1-42 7350 2-Bag Bagwell Upgrade 3. Do the following to remove the Scanner/Scale from the scanner bucket area. a. Grasp the front of the Scanner and lift up. b. Grasp the back of the Scanner and slide scanner out of the bucket area. 4.
  • Page 47 7350 2-Bag Bagwell Upgrade 1-43 5. Tilt the E-Box Bracket forward to easily access the cables. 6. Unplug the pre-installed USB Power Cable from the Scale Controller in the new Bagwell and plug host connector to the USB M Port of the E-Box.
  • Page 48 1-44 7350 2-Bag Bagwell Upgrade 7. Tie the Scale Controller Cable to the main bundle by using six (6) cable ties. Note: Secure the main cable to the E-Box with the first two (2) cable ties. 8. Continue routing the cable down the back of the Receipt Printer, as shown in the image below.
  • Page 49 7350 2-Bag Bagwell Upgrade 1-45 9. Ensure that the cable bundle is not in contact with the Tri-Light pole bracket, DVD Drive, and ventilation fan studs when the E-Box is tilted from Up to Down positions as shown in the image below. 10.
  • Page 50 1-46 7350 2-Bag Bagwell Upgrade 11. Install the Scanner/Scale. To install the Scanner/Scale, follow these steps: a. Grasp the Scanner/Scale by its handles and lower it into the checkstand cutout. Caution: Be careful not to damage any of the cables. b.
  • Page 51 7350 2-Bag Bagwell Upgrade 1-47 12. Ensure the E-Box can rotate freely by adjusting the position of the cable as needed. USB Power Cable should be routed through the left hand lower Core access cutout into the new Bagwell. 13. Unplug the AC Power Out and AC Power In cables from the Power Strip. AC Power In Cable will be reused in the new Bagwell.
  • Page 52 1-48...

This manual is also suitable for:

7350-k1417350-k1427350-k9647350-k1437350-k145